Introduction of myself

Forum for general chat, news, blogs, humour, jokes etc.
Post a reply

Postby Li » Sun Apr 30, 2006 9:40 am


Hello,

I am Li from China and live in Beijing. I just got my driving license not long ago and try to drive as safe as I can. I hope I can achieve this goal by more pratice as well as communicating with all of you in this forum.

Best Regards
Li
Li
 
Posts: 29
Joined: Sun Apr 30, 2006 8:27 am
Top

Postby vonhosen » Sun Apr 30, 2006 9:55 am


Welcome Li :D
Any views expressed are mine & mine alone.
I do not represent my employer or these forums.
vonhosen
 
Posts: 2624
Joined: Sun Sep 11, 2005 8:18 pm
Location: Behind you !
Top

Postby TripleS » Sun Apr 30, 2006 11:29 am


Hello Li,

I hope you enjoy yourself here. :)

Best wishes,
Dave.
TripleS
 
Posts: 6025
Joined: Thu Oct 13, 2005 9:47 pm
Location: Briggswath, Whitby
Top

Postby AdamW » Mon May 01, 2006 2:19 pm


Hi and welcome Li.

:D
Despite their large numbers ants flow freely because of their understanding and purpose. As a driver your job is to move in, within, and out of the flow of traffic causing the minimum disruption and upset to others. Everyone then benefits, including you.
AdamW
 
Posts: 239
Joined: Tue Sep 13, 2005 3:40 pm
Location: East Yorkshire
Top

Postby Roadcraft » Mon May 01, 2006 3:18 pm


歡迎到論壇。 我希望您喜歡這裡和對螺紋將貢獻。 有許多人打開這裡以將是只太願意以至於不能幫助和協助的許多經驗和知識。

欢迎到论坛。 我希望您喜欢这里和对螺纹将贡献。 有许多人打开这里以将是只太愿意以至于不能帮助和协助的许多经验和知识。

Safety1st... 8)
User avatar
Roadcraft
 
Posts: 687
Joined: Wed Sep 14, 2005 10:58 pm
Top

Postby TripleS » Mon May 01, 2006 7:40 pm


Safety1st wrote:歡迎到論壇。 我希望您喜歡這裡和對螺紋將貢獻。 有許多人打開這裡以將是只太願意以至於不能幫助和協助的許多經驗和知識。

欢迎到论坛。 我希望您喜欢这里和对螺纹将贡献。 有许多人打开这里以将是只太愿意以至于不能帮助和协助的许多经验和知识。

Safety1st... 8)


I was going to say that but I didn't want to appear rude. :lol:

Best wishes all,
Dave.
TripleS
 
Posts: 6025
Joined: Thu Oct 13, 2005 9:47 pm
Location: Briggswath, Whitby
Top

Postby Li » Fri May 12, 2006 1:36 am


Safety1st wrote:歡迎到論壇。 我希望您喜歡這裡和對螺紋將貢獻。 有許多人打開這裡以將是只太願意以至於不能幫助和協助的許多經驗和知識。

欢迎到论坛。 我希望您喜欢这里和对螺纹将贡献。 有许多人打开这里以将是只太愿意以至于不能帮助和协助的许多经验和知识。

Safety1st... 8)

:D I was surprised by that even though I could not 100% understand what it wanted to say. :(

If possible, I would like to make my first contribution by making them clear. Is it a standard welcome message to Chinese members? :roll:
Li
 
Posts: 29
Joined: Sun Apr 30, 2006 8:27 am
Top

Postby Li » Fri May 12, 2006 1:41 am


TripleS wrote:
Safety1st wrote:歡迎到論壇。 我希望您喜歡這裡和對螺紋將貢獻。 有許多人打開這裡以將是只太願意以至於不能幫助和協助的許多經驗和知識。

欢迎到论坛。 我希望您喜欢这里和对螺纹将贡献。 有许多人打开这里以将是只太愿意以至于不能帮助和协助的许多经验和知识。

Safety1st... 8)


I was going to say that but I didn't want to appear rude. :lol:

Best wishes all,
Dave.


Don't worry about it. I would be very happy if my mother language spreads as widely as English, no matter by what means, rude or polite. :D I am just joking.
Li
 
Posts: 29
Joined: Sun Apr 30, 2006 8:27 am
Top

Postby BillZZR600 » Fri May 12, 2006 1:50 am


Li ,
I suspect that Saftey1st was using a chinese character font or a translation programme to welcome you,which has not posted correctly (who says computers make for good communication :lol: ) and TripleS was making a joke of it.

After a similar (badly translated and funny but rude :oops: ) incident with a Japanese member of another site, I will just restrain myself to English and simply say Welcome, and I am sure that you will find what you want on this very useful site.

Bill
Kawasaki ZZR600/Renault Laguna 1.8i
RoADAR Advanced Rider (Gold)
RoADAR Aproved (Motorcycle) Tutor
RoADAR Advanced Driver (Gold)
RoADAR Aproved (Car) Tutor
User avatar
BillZZR600
 
Posts: 254
Joined: Tue Jan 31, 2006 10:18 pm
Location: Scotland (East Kilbride)



Top
Post a reply

Return to General Car Chat Forum

Who is online

Users browsing this forum: No registered users and 48 guests

Powered by phpBB® Forum Software © phpBB Group