by Horse » Thu Jun 04, 2009 10:29 am
For the Haz perception Test, there's a few things worth knowing:
- You should only click to be marked when the hazard 'develops' ie that you need to brake, signal, change speed etc.
- However, if you spot a hazard very early, you may click then
- If you click too often then the software will 'fail' you on that clip
- Each clip has just one 'marked' hazard
- Except one clip per test which has two hazards to click for
So, if you see what you think is a hazard which is likely to develop, click, then when that happens, click again ASAP. However, don't click at anything and everything (eg "Well a junction's a hazard, so I clicked" - the junction can't develop - but a pedestrian on the pavement is potentially developing hazard).
HTH
Anything posted by 'Horse' may be (C) Malcolm Palmer. Please ask for permission before considering any copying or re-use outside of forum posting.